Vera Mag 3000 – Industrial

Electromagnetic Application

An unparalleled, cutting-edge product- the Vera Mag 3000™ electromagnetic flow meter is the optimum flow device for seamless, long-lasting performance and valuable measurement data. Designed to perform successfully in demanding industrial water and wastewater industries and applications, the Vera Mag 3000 accurately measures conductive liquids, slurries, and sludge flows. Debris and solids will not clog the line, as these mag meters use a non-intrusive measurement element and are excellent in harsh environments requiring minimal maintenance. Reliable, convenient battery power allows this full-bore meter to be installed wherever flow measurement is needed, including remote locations with unreliable power. Offered with both battery power as well as battery-power backup for AC/DC powered units, the Vera Mag 3000 guarantees performance and measurement data no matter the location.

Key Benefits

  • ✔ No obstructions to the flow
  • ✔ No moving parts to wear or break
  • ✔ Process temperatures up to 200°F
    ✔ Maintenance free
  • ✔ Bi-directional flow
  • ✔ Built in data logger
  • ✔ Wide flow range
Specifications
CategoryDetails
AccuracyAC or DC power: ±1% of measured value ±0.006 ft/s (± 0.0018 m/s)
Battery power: ±1% of measured value ±0.006 ft/s (± 0.0018 m/s)
Reverse Flow: ±1% of measured value ±0.006 ft/s (± 0.0018 m/s)IMPORTANT NOTICE REGARDING FLOW METER ACCURACY: The flow meter, the remote cable and the electronics are factory calibrated for accuracy as a single unit. Changing the remote cable length, even with the splice kit, changes the accuracy of the meter and invalidates the calibration.

Each Vera Mag 3000, along with its signal transmitter, undergoes a multiple-point wet flow calibration with ±0.15% uncertainty relative to flow. If desired, the tests can be witnessed by the customer. The McCrometer test facilities are traceable to the National Institute of Standards & Technology.

Certifications 2:Standard model:
– ISO 9001:2015 certified quality management system
– NSF/ANSI/CAN 61 & NSF/ANSI 372
– Certified by MET to UL 61010-1HL model:
– ISO 9001:2015 certified quality management system
– NSF/ANSI/CAN 61 & NSF/ANSI 372
– Certified to NSF / ANSI Standards*
– Certified by MET to UL 61010-1 and MET C22.2 No. 61010-1-04
– – Class I, Division 2, Groups A-D, T5
– – Class I, Zone 2, IIC T5
Conductivity:5 µs/cm
Converter:ProComm GO transmitter
May be either meter mount or remote mount
Directional Response:Forward and reverse flow indication and forward, reverse, net totalization are standard with all meters
Electrical Connections:Compression gland seals
Quick-Connect
Electrode:
Type 316 stainless steel, Hastelloy optional
IP Rating:Flow tube quick connect: (NEMA 6P/IP68 with remote transmitter)
Flow tube compression gland seals: (NEMA 6P/IP68 with remote transmitter)
Liner:
3M 135 gray epoxy Ultraliner™ (200°F)
Line size:ANSI #150 Flanged 1.5” 2” 2.5” 3” 4 – 24”
AWWA Cl D Flanged 4 – 24”
ANSI #300 Flanged 2” 3” 4” – 24”
Material:
Carbon steel, stainless steel, epoxy liner
Measurement Method:Electromagnetic flow based on Faraday’s law
Options:– DC powered converter (10-35 VDC, 21 W)
– Meter mounted converter
– Extended warranty
– ANSI or AWWA flanges
– Special lay lengths, including ISO standard lay lengths
– Quick connect cable fittings
– Converter sun shield
– Battery or battery-solar powered converter
Outputs:
– Smart Output™ (Sensus, Itron 6, Itron 9)
– Data logger
– Passive 4-20mA
– Pulse
– Modbus
Pressure Rating:ANSI #150 285 PSI maximum working pressure
AWWA Cl D 150 PSI maximum working pressure
ANSI #300 500 PSI maximum working pressure
Repeatability:
±0.05% or ±.0008ft/s (±0.25mm/s), whichever is greater
  
Requirements:

Pipe Run Requirements

1.5”, 2”, 2.5” & 3” ANSI#150 Flanged style: 0D upstream / 0D downstream
4” – 24″ flanged: 2D upstream / 1D downstream

Sensor Cable:

Standard: 25’/7.6 m McCrometer supplied submersible cable with each remote mount unit.

Optional: Up to 500’/152.4 m, or 25’/7.6 m max for battery powered.

Quick Connect: Available in standard cable lengths:

Feet: 25, 50, 75, 100, 125, 150, 175, 200, 500
Meters: 7.6, 15.25. 22.5, 30.5, 38.1, 45.75, 53.3, 61, 152.4

Custom cable lengths at additional cost.

Sensor Immersion Depth:With standard strain relief cable: 9 m (30 ft.)
With optional quick connect cable: 1.8 m (6 ft.)
Temperature:Operating Temperature: -10 to 93°C (14 to 200°F)
Storage Temperature: -15 to 93°C (5 to 200° F)
Velocity Measurement Range:0.2 to 32 FPS
Warranty:
5-year full meter warranty, 5-year battery life days
DocumentDownload
BrochureDownload
ManualDownload
 

• Remote distribution main water
• Remote campus chill water
• Remote boiler feed water
• Remote fire water
• Reuse water inside the fence
• Cooling tower applications

Coming soon!

Coming soon!

Contact Us for more information or a quote on accessories.

Scroll to Top

Request a Quote

Tell us a little about your measurement requirements. Our team will get in touch with you.